True Refrigeration T-49-4-HC EA

Description

The True T-49-4-HC two-section refrigerator includes four half doors that open independently, enabling customizable storage and increased energy efficiency. To protect its aluminum construction, the interior of the cabinet is finished in a clear-coat while the stainless steel floor has coved corners for cleaning up spills and debris. Product is stored on six adjustable, PVC-coated shelves.
The True T-49-4-HC reach-in refrigerator ensures cold air is evenly distributed with condenser and evaporator fan motors, while the self-contained capillary tube system uses R290 hydrocarbon refrigerant to maintain cool temperatures. Temperatures in the cabinet can be set between 33 and 38 degrees Fahrenheit, and since the refrigeration system is mounted on the bottom of the unit, it is accessible for maintenance.
To help maintain the condensing coil over time, when the compressor turns on, the condensing fan moves in a reverse direction for 20 seconds. This helps eliminate buildup of dust, debris, and dirt for efficiency and general operation. However, this mechanism should not replace general preventative maintenance practices.
Product Details
Stainless steel cabinet front and anodized aluminum sides, ends, back, and top
Clear-coated aluminum interior liner
Stainless steel floors have coved corners to simplify cleanup
Cabinet structure is insulated with foamed-in-place polyurethane
Steel frame is welded and black powder-coated for rust resistance
4-in.-diameter stem castors enable repositioning
Locks on doors protect cabinet contents when the unit is unattended
Doors are finished with stainless steel exteriors and interior liners that match the rest of the cabinet interior
Recessed, 12-in. door handles are foamed in place with sheet metal interlocks to remain permanently attached
Doors are self-closing and form a positive seal
Magnetic, one-piece door gaskets remove without tools for cleaning
6 gray PVC-coated shelves are adjustable in
1
⁄
2
-in. increments
Interior LED lights are activated by door rocker switch
Exterior temperature display enables users to keep tabs on interior temperatures
Epoxy-coated evaporator avoids rusting
Consistent Cooling
Self-contained capillary-tube system uses R290 hydrocarbon refrigerant to maintain cool temperatures
Electronically-commutated evaporator and condenser fan motors move air consistently through the cabinet for even temperatures
Reverse condensing coil motor fan moves in a reverse direction for 20 seconds
Condensing unit is located in the bottom for accessibility
Dimensions & Utilities
Shelves: 24
9
⁄
16
in. W x 22
3
⁄
8
in. D
Overall: 54
1
⁄
8
in. W x 29
1
⁄
2
in. D x 83
3
⁄
8
in. H
5.4 A,
1
⁄
2
HP
115 V/60 Hz/1 ph, 9-ft. cord with a NEMA 5-15P plug
Not sure if this unit would suit your operation? Read our
article on two-section refrigerators
for additional information.
Refrigerator, reach-in, two-section, (4) stainless steel half doors, (6) PVC coated adjustable wire shelves, interior lighting, stainless steel front, aluminum sides, aluminum interior with stainless steel floor, 4" castors, R290 Hydrocarbon refrigerant, 1/2 HP, 115v/60/1-ph, 5.4 amps, NEMA 5-15P, cULus, UL EPH Classified, Made in USA The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.