LIEBHERR 5 AXIS GEAR HOB, MODEL LC-255, FANUC 18i-MA, REBUILT/RETROFIT 2006

Description

This machine was recontrolled by Machine Tool Builders in 2006 with a Fanuc 18i-MA CNC and Fanuc Alpha series digital drives and motors.  An entire new electrical cabinet was installed along with all new equipment inside the electrical cabinet.  All support, service, parts and training are still available through Machine Tool Builders.  Machine upgrades, software additions or other machine modifications or tooling that might be required are also available through Machine Tool Builders.  The software in the machine is fully conversational based so the simple question and answer format allows quick and easy programming of all spur and helical gears within the machine size and DP rating.
Number of CNC controlled axes
5
Number of CNC controlled spindles
1
Pitch rating
4.23
DP
6
Mod
Maximum workpiece diameter
9.843
in
250
mm
Maximum axial travel
9.843
in
250
mm
Worktable diameter
9.843
in
250
mm
Worktable Worm Diameter
11.220
in
285
mm
Table bore diameter
3.937
in
100
mm
Maximum radial center distance
8.071
in
205
mm
Minimum radial center distance
0.787
in
20
mm
Maximum axial height from tabletop
15.354
in
390
mm
Minimum axial height from tabletop
5.512
in
140
mm
Maximum hob diameter
5.709
in
145
mm
Maximum hob length
9.055
in
230
mm
Maximum hob shift travel
6.693
in
170
mm
Maximum swivel angle
-45
deg
+45
deg
Hob speed range (Infinitely Variable)
48
to
480
RPM
Hob Spindle Power
10.7
HP
8
kW
Rapid traverse radial
118.110
in/min
3000
mm/min
Rapid traverse axial
78.740
in/min
2000
mm/min
SPECIFICATION SUBJECT TO VERIFICATION
CONDITIONS OF SALE
TERMS
:
Cash or check with order, unless otherwise stated.
WARRANTY:
The goods described herein are pre-owned used goods and are offered "as is", "where is" unless otherwise noted herein, SELLER MAKES NO WARRANTIES OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, OR MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  All specifications and description of said goods are approximate only.  It is the Buyers responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods conform to Buyer's requirements.
MACHINE USE AND SAFETY:
Buyer acknowledges that the goods described herein are preowned used GOODS WHICH WERE NEITHER DESIGNED NOR MANUFACTURED BY THE seller, nor has the Seller knowledge of,  or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer.  It is the Buyer's (user's) responsibility to provide proper safety devices, equipment and instructions for any particular use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA.
INDEMNIFICATION:
Buyer agrees to indemnify, hold harmless and defend Seller of and from any and all claims, liabilities and damages from any accidents or other incidents involving the goods described herein.