16-36 BARBER COLMAN Horizontal Gear Hobber - #28841

Description

Model No. 16-36 BARBER COLMAN Horizontal Gear Hobber  #28841
Serial No. 3021
TO VIEW VIDEO:
https://youtu.be/NX_vc_JTq0Y
Suitable for the cutting of  spur/helical gears, pinions, splines, and
other workpieces of similar profile up to  16"(400mm) pitch diameter,
and 36" (914mm) face width.
EQUIPMENT / FEATURES:
Standard hobslide (+/- 45 degrees swivel)
One (1) hob arbor
Assortment of change gears
Double thread index worm
Manual chucking
Pneumatic tailstock w/center
Special tapered wedge inserted under main column
enabling a “fixed” taper to be generated on gears/splines
(can be removed for conversion back to standard)
Power rapid traverse for hob carriage
Complete coolant system, pump tank & piping
Full complement of electrics (motors/controls)
(presently arranged for 460V, 60Hz operation)
Assorted guards/covers
PRINCIPAL SPECIFICATIONS:
Maximum rated diameteral pitch (nominal)
6 DP  (4.2 module)
Maximum rated diameter of work
16"   (406mm)
Maximum hob diameter
5"  (127mm)
Maximum hob-slide travel
36"   (914.4mm)
Maximum work slide travel
8"  (203.2mm)
Maximum distance, work spindle centerline to
hob spindle centerline
8.75”  (222mm)
Minimum distance, work spindle centerline to
Hob spindle centerline
.75”  (19.05mm)
Maximum distance work spindle face
to tailstock-center
64"  (1625mm)
Work spindle thru-bore diameter
3.046" (77.375mm)
Hob speed range
59 to 425  rpm
Feed ranges
.015 to .150 i.p.r.
Main drive motor
5 HP/1800 rpm
Rapid traverse
2 HP
Coolant pump
1/4 HP
Lubrication pump
1/20 HP
Floor space required
102" x 38"  (2591x950mm)
Machine overall height
76”  (1930mm)
Machine net weight (approx)
6,900 lbs. (3,136 kGs)
PRICE: F.O.B. OUR WAREHOUSE      ,500.00
ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL